THIS KIT HAS EVERYTHING YOU NEED TO BUILD THE AR-47 8-POINT-FIVE PISTOL EXCEPT A STRIPPED LOWER.
The AR-47 8-Point-Five Pistol Kit packs massive fire power into a compact weapon system perfect for home defense or just blowing off steam at the range. This pistol kit is chambered for the 7.62×39 caliber and is equipped with a muzzle brake for superior control. The 8-Point-Five also features an FDE Karve-P handstop and a DI enhanced pistol grip. An ambidextrous charging handle provides optimal charging from either side and a sleek look. The kit also INCLUDES a 30 round stainless steel magazine and a single point bungee sling for added portability and weapon control.
The upper assembly features a pistol length gas system and a durable CBC Industries handguard. Perfect for your next build, this AR-15 pistol kit will provide reliable operation and is backed by the CBC Industries lifetime warranty.
BOLT CARRIER GROUP AND CHARGING HANDLE INCLUDED
Barrel: 8.5″ 7.62×39 Melonite Barrel Chrome Moly
Twist Rate: 1:10
Feed Ramps: M4
BCG: Case Hardened 8620 Steel Nitride Coated, M4/AR-15 Compatible, Mil-Spec/MP Tested
Gas Block: Steel .750 Low Profile
Gas Tube: DGI Stainless Pistol-Length
Muzzle Device: Steel A2 Style Flash Hider
Rail: 7″ Free Float Keymod Rail
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
CBC Industries Pistol Buffer Tube Kit includes:
- Pistol receiver extension
- Standard 3 oz carbine buffer
- Carbine spring
- Castle nut
- End plate
- Comfortable foam cheek pad
Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components include:
Hammer, Hammer Pin, Hammer Spring, Trigger, Trigger Pin, Trigger Spring, Trigger Guard ,Trigger Guard Pin, Disconnector, Disconnector Pin, Safety Selector, Safety Selector Detent, Safety Selector Spring, Pistol Grip, Pistol Grip Screw, Pistol Grip Lock Washer, Bolt Catch, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch Roll Pin, Take Down Pin, Pivot Pin, Take down & Pivot Detent (x2), Take down & Pivot Spring (x2), Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Buffer Retaining Pin,Buffer Retaining Pin Spring
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Please Note: An “AR-15 Pistol” upper assembly has a barrel less than 16” in length. Pistol uppers are only for use on AR-15 pistol lowers and legal Short-Barreled Rifles. Other configurations may violate Federal law. Installation of AR-15 upper assemblies with certain features including, but not limited to: flash hiders, bayonet lugs, and threaded muzzles may violate state and/or local laws.
Product Details: AR-47 8-Point-Five Pistol Kit – 8.5 Inch / 7.62×39 / 1:10 Twist / Keymod / Ambi CHH / DI Grip / Muzzle Brake / 205820
➲ Pistol Length Gas Tube
An essential component to your AR15 is the gas tube, which keeps your build up and running. This gas pistol-length tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
➲ Upper Receiver
The foundation of all good ARs is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.
➲ A2 Flash Hider
The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooter’s night vision by disrupting the muzzle flash when firing in low light conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.
➲ AR-15 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.
➲ Pistol Buffer Tube Assembly
This AR-15 Pistol Buffer Tube Assembly comes with everything you need to get your next ar pistol build ready. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. The tube is extruded from 6061-T6 aluminum and has a matte black hardcoat anodized finish. This assembly features a snug fit to ensure no unwanted brace movement during pistol operation. In addition, it allows for any desired brace position with zero restrictions giving you the most comfortable fit and versatility.
➲ Ambidextrous Charging Handle
A central component of your AR-15, the charging handle not only assists in chambering a round but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. This ambidextrous charging handle features textured latches on both sides permitting you can quickly charge your AR15 from either side. The latches are strong enough that you can use the palm of your hand or your thumb for quick weapon manipulation. Delivering superior function and ease of use, this ambidextrous charging handle is the perfect compliment to your AR Upper Assembly.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-47 than the bolt carrier group. Manufactured to MIL-SPEC and finished with a superior quality nitride finish that protects against corrosion and heat, our BCG will not let you down. To ensure that it will provide superior performance in your AR-47, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Whether you’re looking for a drop-in Mil-Spec quality replacement for your current AR, or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a premium product.
➲ AR15 Muzzle
Not all muzzle devices are created the same. There aren't many muzzle brakes and compensators that demonstrate high-pressure gas dynamics. This AR-15 Muzzle Brake has a three chamber design that significantly reduces muzzle rise.