NO TAX STAMP REQUIRED FOR THIS SBR – THE OVERALL LENGTH OF THIS RIFLE IS 16″ DUE TO THE WELDED COMPENSATOR.
This special offer SBR .223 Wylde includes a Tippmann red-dot optic, ambidextrous charging handle, 30 round ploymer magazine, and CBCFPA sticker decal.
Proudly manufactured in Charleston, SC with high-quality material and meticulous workmanship.
The flat top M4 Mil-Spec upper receiver is forged CNC machined from 7075-T6 aluminum, the most durable material available for this application! The upper is then Mil-Spec Type 3 hard coat anodized for improved surface finish and strength.
This 14.5” .223 barrel is made from 4150 Chrome Moly steel. This SBR has a 1:8 twist rate, carbine gas system, and is head spaced twice from the US manufacturer. The CBCPFA barrel is incredibly accurate, durable, and is manufactured with 4150 CM steel with a nitride coating. The overall length of the barrel is considered 16″ thanks to the pinning and welding of the linear compensator – this means that you can have this 14.5″ .223 Wylde SBR barrel in your build without the need for a tax stamp!
Barrel: 14.5” .223 Wylde Melonite Barrel Chrome Moly
Twist Rate: 1:8
Feed Ramps: M4
Gas Block: Steel .750 Low Profile
Gas Tube: DGI Stainless Carbine-Length
Muzzle Device: Afterburner Linear Compensator
Rail: 15″ M-LOK
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Product Details: AR15 COMPLETE RIFLE – 14.5 Inches / .223 Wylde / M-LOK / Pinned & Welded / 200449
➲ CBC Industries AR Lower
Our Stripped Lower Receiver is a Mil-Spec, ar lower ideal for your next custom build. It is forged from 7075-T6 aluminum in the standard Mil-Spec pattern to ensure a tight fit for all standard lower receivers. It is hard coat anodized to provide a wear resistant protection and includes bullet pictograms for the selector markings. Weighing in at only 8.6 ounces, this stripped lower receiver will work perfectly for your next build.
The barrel is one of the few components that directly affect the accuracy and weight of your build. This barrel has a nitride finish for increased strength and durability. While featuring a special contour that is designed to be lighter than a conventional SOCOM barrel giving you that extra edge when shooting 3-gun competitions. This barrel offers a 1:8 twist rate, suitable for both heavy and light ammunition. It is corrosion resistant resulting in an extended barrel life that is longer than conventional chrome lining. Thus, being the perfect barrel for long distance shooting, competitions, hunting and practically any shooting application you’ll subject your AR15 too.
➲ Upper Receiver
The foundation of all good ARs is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-15 than the bolt carrier group. Manufactured to MIL-SPEC and finished with a superior quality nitride finish that protects against corrosion and heat, our BCG will not let you down. To ensure that it will provide superior performance in your AR-15, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Whether you’re looking for a drop-in Mil-Spec quality replacement for your current AR, or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a premium product.
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth phosphate finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
➲ AR-15 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.
➲ Afterburner Compensator
The CBC Afterburner compensator is a muzzle device that designed to reduce flash intensity while suppressing recoil. These linear compensators are machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It utilizes a linear design to direct the high-pressure gas behind the bullet in a straight line away from the shooter which results in a reduction of perceived noise. Due to its six-hole design surrounding the central bore, it provides effective flash suppression that preserves the shooter’s vision in low light conditions.
➲ Carbine Gas Tube
An essential component to your AR15 is the gas tube, which keeps your build up and running. This carbine-length gas tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.
➲ Buffer Tube Assembly
This buffer tube assembly kit includes an impact extruded 7075-T6 aluminum receiver extension with a durable hardcoat anodized finish. Featuring an extended bottom lip reducing carrier tilt, the buffer tube is compatible with MIL-SPEC AR-15 stocks.
➲ Adaptive Tactical EX Adjustable Stock
Advanced design and a high-impact polymer construction make the Adaptive Tactical EX Performance Adjustable AR-15 Buttstock the ideal upgrade for your AR15. The EX Performance M4-style Stock features an easy-to-reach rapid adjust lever for custom length-of-pull, and includes an integrated QD swivel attachment and molded in non-rust standard sling swivel attachment. Durable polymer construction with non-slip vented rubber recoil pad, oversized extra strength adjustment pin, and sleek industrial design.
➲ Amend2 30 Round Magazine
The Amend2 30 round magazine is a sturdy, reliable 5.56x45 NATO (.223 Remington) AR15/M4/M16 magazine made of advance polymer material. It is a light, durable and excellent alternative to the standard M4/M16 USGI aluminum magazine.
➲ Ambidextrous Charging Handle
A central component of your AR-15, the charging handle not only assists in chambering a round but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. This ambidextrous charging handle features textured latches on both sides permitting you can quickly charge your AR15 from either side. The latches are strong enough that you can use the palm of your hand or your thumb for quick weapon manipulation. Delivering superior function and ease of use, this ambidextrous charging handle is the perfect compliment to your AR Upper Assembly.
➲ M-LOK Handguard
New for 2020, these AR-15 handguards are built to provide rugged, reliable performance. Designed with the advanced shooter in mind, these handguards are both sleek and ergonomic in the hand and that translates into faster on-target performance and ease of use. These AR handguards provide M-LOK slots for mounting attachments and feature robust steel mounting hardware to ensure an easy rock-solid installation.