This MICRO AR15 upper receiver assembly comes ready to attach to any Mil-Spec lower receiver. The receiver is a flat top M4 forged Mil-Spec upper receiver that is CNC Machined from 7075-T6 aluminum – the hardest and most durable material of any upper. The MICRO 5” 5.56 NATO barrel is manufactured with 4150 Chrome Moly steel and has a 1:5 twist rate & MICRO gas system. This upper assembly features a standard A2 flash hider that effectively suppresses muzzle flash.
- Barrel: 5″ 5.56 NATO Barrel Chrome Moly
- Twist Rate: 1:5
- Feed Ramps: M4
- Gas Block: Steel .750 Low Profile
- Gas Tube: DGI Stainless Micro-Length
- Muzzle Device: A2 Flash Hider
- Rail: 4″ M-LOK Rail
- Upper Receiver: Forged Upper Receiver
- Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
Please Note: An “AR-15 Pistol” upper assembly has a barrel less than 16” in length. Pistol uppers are only for use on AR-15 pistol lowers and registered Short-Barreled Rifles. Other configurations may violate Federal law. Installation of AR-15 upper assemblies with certain features including, but not limited to: flash hiders, bayonet lugs, and threaded muzzles may violate state and/or local laws.
Product Details: AR-15 Upper Assembly – 5″ MICRO 5.56 NATO / 1:5 / 4″ M-LOK Handguard / 160814
The barrel is one of the few components that directly affect the accuracy and weight of your build. This barrel has a nitride finish for increased strength and durability. It is corrosion resistant resulting in an extended barrel life that is longer than conventional chrome lining.
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
➲ Upper Receiver
The foundation of all good ARs is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.
➲ A2 Flash Hider
The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooters night vision by disrupting the muzzle flash when firing in low light conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.
CBC provides a wide selections of AR-15 upper assemblies in a variety of styles and lengths - all partial AR-15 uppers are assembled with everything less the charging handle and bolt carrier group. Our partial upper assemblies offer quality and performance that will satisfy the most demanding shooter. Better yet, all CBC AR-15 uppers are custom built-to-order enabling us to provide you with the best prices you will find anywhere. The quality of our AR-15 uppers are backed by our Lifetime Warranty - if any CBC upper assembly becomes defective, we will repair or replace it at no charge. Get your AR-15 upper assembly at CBC today!