THIS KIT IS EVERYTHING YOU NEED TO BUILD AN AR-9 RIFLE EXCEPT A STRIPPED LOWER
The receiver is a Mil-Spec 9mm upper receiver, forged & CNC Machined from 7075-T6 Aluminum, and is a lock-back 9mm configuration. This 16” 9mm barrel is made from 4150 Chrome Moly steel, has 1:10 twist rate & blow back gas system. The rail is a 15” Keymod rail made from aerospace aluminum and then hard coat anodized to improve the strength!
BOLT CARRIER GROUP AND CHARGING HANDLE INCLUDED
Barrel: 16″ 9mm Melonite Barrel Chrome Moly
Twist Rate: 1:10
Feed Ramps: M4
BCG: Case Hardened 8620 Steel Nitride Coated
Muzzle Device: Afterburner Compensator
Rail: 15″ Keymod
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
CBC Industries Buttstock Kit includes:
- 6 Position Buttstock
- Locking clip to ensure placement
- Mil-Spec Receiver Extension
- Mil-Spec Spring
- End Plate
- Locking Castle Nut
Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components include:
Hammer, Hammer Pin, Hammer Spring, Trigger, Trigger Pin, Trigger Spring, Trigger Guard, Trigger Guard Pin, Disconnector, Disconnector Pin, Safety Selector, Safety Selector Detent, Safety Selector Spring, Pistol Grip, Pistol Grip Screw, Pistol Grip Lock Washer, Bolt Catch, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch Roll Pin, Take Down Pin, Pivot Pin, Takedown & Pivot Detent (x2), Takedown & Pivot Spring (x2), Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Buffer Retaining Pin, Buffer Retaining Pin Spring
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Product Details: AR-15 Rifle Kit – 16″ / 9mm Lock Back / 1:10 / 15″ Keymod / BCG & CHH / Buttstock Kit / Afterburner Compensator / Lower Parts / 205-122
➲ CBC Keymod Handguard
New for 2020, these AR15 handguards are built to provide rugged, reliable performance. Designed with the advanced shooter in mind, these AR handguards are both sleek and ergonomic in the hand and that translates into faster on-target performance and ease of use. These AR handguards provide Keymod slots for mounting attachments and feature robust steel mounting hardware to ensure an easy rock-solid installation.
➲ AR-15 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.
The barrel is one of the few components that directly affect the accuracy and weight of your build. Designed for corrosion resistance, this barrel will not let you down. This barrel is machined from 4150 Chrome Moly Steel, heat treated to RC 28-32 hardness, and properly stress relieved. This barrel has a nitride finish for increased strength and durability. It is chambered 9mm chamber, with a 1:10 twist rate. This is the perfect barrel for an AR9 build, keeping weight to an absolute minimum, while still offering a significant ballistic advantage.
➲ Afterburner Compensator
The CBC Afterburner compensator is a muzzle device that designed to reduce flash intensity while suppressing recoil. These linear compensators are machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It utilizes a linear design to direct the high-pressure gas behind the bullet in a straight line away from the shooter which results in a reduction of perceived noise. Due to its six-hole design surrounding the central bore, it provides effective flash suppression that preserves the shooter’s vision in low light conditions.
➲ Standard MIL-SPEC Charging Handle
A central component of your AR-15, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-9 than the bolt carrier group. Manufactured to MIL-SPEC and finished with a superior quality nitride finish that protects against corrosion and heat, this 9mm (GLOCK STYLE) BCG will not let you down. To ensure that it will provide superior performance in your AR-9, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Designed for both standard and lock-back operating systems, this 9mm bolt provides heavy-duty performance and reliable cycling.