Sale!
NOTE: Images may not be an exact representation of the product.
Out of Stock

AR-15 Pistol – 5″ MICRO 300 Blackout / 1:7 / Pistol Buffer Tube / 4″ Keymod Handguard / BCG / Charging Handle / 200820

Icon - 300AAC Blackout AR CaliberIcon - 1:7 Twist RateIcon - 5 AR Barrel

This CBC Industries MICRO Pistol is built around a 5” 300 Blackout 4150 Chrome Moly barrel with a black nitride finish with 1:5 twist rate & MICRO gas system. The upper and lower receivers are machined from 7075-T6 aluminum forgings, hard-coated anodized black. The CBC Industries handguard provides shooters with convenient mounting points for accessories. Barrel: 5” 300 AAC Blackout 4150 Chrome Moly Twist Rate: 1:7 Feed Ramps: M4 BCG: Case Hardened 8620 Steel Nitride Coated - [READ MORE BELOW]

FREE SHIPPING

Description

This CBC Industries MICRO Pistol is built around a 5” 300 Blackout 4150 Chrome Moly barrel with a black nitride finish with 1:5 twist rate & MICRO gas system. The upper and lower receivers are machined from 7075-T6 aluminum forgings, hard-coated anodized black. The CBC Industries handguard provides shooters with convenient mounting points for accessories.

  • Barrel: 5” 300 AAC Blackout 4150 Chrome Moly
  • Twist Rate: 1:7
  • Feed Ramps: M4
  • BCG: Case Hardened 8620 Steel Nitride Coated, M4/AR-15 Compatible, Mil-Spec/MP Tested
  • Gas Block: Steel .750 Low Profile
  • Gas Tube: DGI Stainless Micro-Length
  • Muzzle Device: A2 Flash Hider
  • Rail: 4″ Keymod Rail
  • Lower Receiver Manufacturer: CBC Industries
  • Upper Receiver: Mil-Spec, Forward Assist & Dust Cover Installed
  • 10 Round Magazine Included

Product Details: AR-15 Pistol – 5″ MICRO 300 Blackout / 1:7 / Pistol Buffer Tube / 4″ Keymod Handguard / BCG / Charging Handle / 200820

➲ M-LOK Handguard

New for 2022, these AR-15 handguards are built to provide rugged, reliable performance. Designed with the advanced shooter in mind, these handguards are light and ergonomic, features that provide faster on-target performance and reduced fatigue. Includes robust steel mounting hardware to ensure an easy installation and a rock solid platform.

➲ A2 Flash Hider

The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooter’s night vision by disrupting the muzzle flash when firing in low light conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.

➲ Barrel

The barrel is one of the few components that directly affect the accuracy and weight of your build. This barrel has a nitride finish for increased strength and durability. This provides not only an impressive barrel life but ensures excellent accuracy. The barrel threads are carefully threaded to the .308 standard. Optimized for stability with a 1:7 twist rate, this 300 BLK barrel can handle heavier bullets used for subsonic loads with ease.

➲ Pistol Length Gas Tube

An essential component to your AR15 is the gas tube, which keeps your build up and running. This gas pistol-length tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.

➲ .750 Low Profile Gas Block

The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth phosphate finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.

➲ Pistol Buffer Tube Assembly

This AR-15 Pistol Buffer Tube Assembly comes with everything you need to get your next ar pistol build ready. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. The tube is extruded from 6061-T6 aluminum and has a matte black hardcoat anodized finish. This assembly features a snug fit to ensure no unwanted brace movement during pistol operation. In addition, it allows for any desired brace position with zero restrictions giving you the most comfortable fit and versatility. 

➲ AR-15 Lower Parts

The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.

➲ Bolt Carrier Group

There is nothing more crucial to the performance of your AR-15 than the bolt carrier group. Manufactured to MIL-SPEC and finished with a superior quality nitride finish that protects against corrosion and heat, our BCG will not let you down. To ensure that it will provide superior performance in your AR-15, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Whether you’re looking for a drop-in Mil-Spec quality replacement for your current AR, or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a premium product.

➲ Standard MIL-SPEC Charging Handle

A central component of your AR-15, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.

➲ Upper Receiver

The foundation of all good ARs is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.

➲ CBC Industries AR Lower

Our Stripped Lower Receiver is a Mil-Spec, ar lower ideal for your next custom build. It is forged from 7075-T6 aluminum in the standard Mil-Spec pattern to ensure a tight fit for all standard lower receivers. It is hard coat anodized to provide a wear resistant protection and includes bullet pictograms for the selector markings. Weighing in at only 8.6 ounces, this stripped lower receiver will work perfectly for your next build.

Additional information

Caliber

Barrel Length

Rail/Handguard

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.