The CBC Industries AR9 Carbine is not simply a converted AR-15, this 9mm Carbine has been specifically designed for superior reliability and maximum accuracy, while retaining the familiar handling and controls of the AR platform. It operates from a blow back system much like your average pistols. The upper receiver is the same as your AR-15 and does not have a lock back feature. Matched with our CBC Glock Style lower receiver this carbine will accept all glock 17 magazines. The 16″ barrel rests inside of a 12″ Hera Arms unmarked free floating keymod rail system. Allowing for better air flow and barrel cooling during rapid firing.
Barrel: 16” 9mm Nitride Barrel Chrome Moly
Twist Rate: 1:10
Feed Ramps: M4
BCG: AR-9 Standard 9mm BCG
Gas Block: Blow back operated
Gas Tube: Blow back operated
Muzzle Device: Steel A2 Style Flash Hider
Rail:12″ Hera Arms Unmarked Keymod Rail
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
Charging Handle: Mil-Spec Aircraft Aluminum with Steel Latch
Lower Receiver: Forged CBC Industries Glock Style Lower Receiver Lockback with Tension Adjustment Screw
LPK: Mil-Spec Lower Parts Kit
Grip: Molded Over Grip
Buffer Tube: Mil-Spec Standard Weight Buffer and Spring, 6 Positional Buffer Tube, Castle Nut
Stock: 6 Position Stock
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Product Details: CBC Industries Rifle 16″- Lock Back Lower 9MM
➲ Upper Receiver
The foundation of all good ARs is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-9 than the bolt carrier group. Manufactured to MIL-SPEC and finished with a superior quality nitride finish that protects against corrosion and heat, this 9mm (GLOCK STYLE) BCG will not let you down. To ensure that it will provide superior performance in your AR-9, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Designed for both standard and lock-back operating systems, this 9mm bolt provides heavy-duty performance and reliable cycling.
➲ A2 Flash Hider
The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooter’s night vision by disrupting the muzzle flash when firing in low light conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.
The barrel is one of the few components that directly affect the accuracy and weight of your build. Designed for corrosion resistance, this barrel will not let you down. This barrel is machined from 4150 Chrome Moly Steel, heat treated to RC 28-32 hardness, and properly stress relieved. This barrel has a nitride finish for increased strength and durability. It is chambered 9mm chamber, with a 1:10 twist rate. This is the perfect barrel for an AR9 build, keeping weight to an absolute minimum, while still offering a significant ballistic advantage.
➲ AR-15 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.
➲ Standard MIL-SPEC Charging Handle
A central component of your AR-15, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.