The 6.5 Creedmoor is based on the AR-308 platform. This Firearm combines the outstanding flight characteristics of the 6.5 mm bullet with the unquestioned power of .308 cartridge producing an extremely precise system for taking those long-range shots with confidence.
Material: Chrome Moly Steel
Muzzle Device: Flash Hider
Caliber: 6.5 Creedmoor
Feed Ramps: M4
Forged 7075 T-6 Aluminum Upper Receiver
Gas Block: Steel .750 Low Profile
Gas Tube: Extended Rifle Length Stainless Steel
Forged CBC Industries 7075 T-6 Aluminum Lower Receiver
Bolt Carrier Group
Case Hardened 8620 Steel
6065 Aircraft Grade Aluminum
15” Hera Keymod
CBC Industries 6 Position “SOPMOD” Buttstock
Rifle Scope: 6-24 x 50mm (Included)
Bi-Pod is included
7.62/6.5 Multiple Caliber Magazine Included
AR DMPS LR/SR (Gen 1) format
Rifles are tested with 125 Grain Ammo
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Product Details: CBC Industries 22″, 6.5 Creedmoor Complete Rifle 15″ Keymod Rail
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
➲ Compact Bipod
This Compact Bipod (Smooth Legs) is designed for use on firearms with a sling swivel installed to mount it to. The Compact Bipod (Smooth Legs) is perfect for AR15/M16 and many other platforms. The legs are connected to the mount with large springs that allow the user to instantly deploy them. The Compact Bipod (Smooth Legs) is adjustable for height on both legs to compensate for uneven terrain or shooting benches. The Compact Bipod (Smooth Legs) comes equipped with rubber legs caps to prevent slipping on wet or slick surfaces and is 7.8\\\" overall.
➲ CBC Industries AR10 Lower
Our AR10 Stripped Lower Receiver helps you build a big-bore AR from the ground up. This lower receiver is machined from 7075 Aircraft Grade Aluminum and level II hard coat to ensure the highest quality receiver.
➲ AR15 Linear Compensator
This AR15 Linear compensator is a great fitment for all AR style rifles, pistols, and SBRs. This compensator helps to mitigate concussion while while also reducing muzzle flash. The inside is designed with 12 expansion chambers which lets the gas expand and dissipate to permit shooting in close proximity a much more enjoyable experience for everyone involved. The 2nd Generation build has been manufactured to be 30% lighter when compared to the prior version. This linear compensator wont let you down.
➲ Standard AR-10 Charging Handle
A central component of your AR-10, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-10. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-10 than the bolt carrier group. Manufactured to DPMS and finished with a a superior quality parkerized finish that protects against corrosion and heat, our BCG will not let you down. To ensure that it will provide superior performance in your AR-10, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Whether you’re looking for a drop-in DPMS quality replacement for your current AR, or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a premium product.
➲ Sopmod Buttstock
Sought after by military professionals and firearms enthusiasts, for its exceptional cheek weld and storage capabilities this stock will fit a Mil-Spec Receiver Extension (Buffer Tube). With its snag-free design, there are no sharp edges to tangle the rifle in the sling, MOLLE gear, or other kits.
➲ Buffer Tube Assembly
This AR-10 Buffer Tube Assembly comes with everything you need to get your next ar build ready. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. The tube is extruded from 6061-T6 aluminum and has a matte black hardcoat anodized finish. This assembly features a snug fit to ensure no unwanted buttstock movement during operation. In addition, it allows for any desired 6 position placement with zero restrictions giving you the most comfortable fit and versatility.
➲ AR-10 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-10 lower parts provide rock-solid performance in demanding conditions.
➲ 6.5 Creedmoor Barrel
Perfect for long-range target shooters and hunters, the 6.5 Creedmoor was originally designed as an across-the-course high power rifle cartridge. While it excels at its intended role, it is a favorite among the precision rifle crowd. This barrel was designed to be built on the AR10 platform. Machined from 4150 chrome moly steel with a 1:8 twist rate and nitride finish, this barrel will deliver round after round consistently and accurately.