Sale!

20″ 6.5 Stainless Creedmoor Complete Upper Assembly / 15″ M-Lok / BCG and CHH incl.

Icon - 6.5 Creedmoor AR CaliberIcon - 1:8 Twist RateIcon - 20 AR Barrel

This AR10 upper receiver assembly comes ready to attach to a DMPS LR/SR (Gen 1) lower receiver. It is built around a 20 inch, stainless steel barrel that is chambered in 6.5 Creedmoor. The upper receiver is a forged M4 flat top upper, allowing you to easily attach rifle scopes and red dot sights to the picatinny rail. This complete upper assembly comes with a bolt carrier group and charging handle.

SAVE $160 TODAY - NORMALLY $679

Description

This AR10 upper receiver assembly comes ready to attach to a DMPS LR/SR (Gen 1) lower receiver. It is built around a 20 inch, stainless steel barrel that is chambered in 6.5 Creedmoor. The upper receiver is a forged M4 flat top upper, allowing you to easily attach rifle scopes and red dot sights to the picatinny rail. This complete upper assembly comes with a bolt carrier group and charging handle.

Outfitted with a 15″ M-LOK Rail that contains generously sized M-LOK cuts, this upper assembly allows for maximum air circulation around the barrel for faster cooling and keeps the handguard from getting hot to the touch. The rail also features a full-length picatinny top rail that sits flush with the upper receiver and has anti-rotation tabs to keep it locked in place.  This complete upper assembly comes with an afterburner compensator that effectively countering recoil and unwanted muzzle rise

  • Barrel: 20” Stainless Steel Barrel, Chambered in 6.5 Creedmoor.
  • Twist Rate: 1 in 8”.
  • Feed Ramps: M4
  • BCG: Case Hardened 8620 Steel, Nitride Treated and MP Inspected.
  • Gas Block: Steel .936 Low Profile Micro
  • Gas Tube: Rifle length stainless Steel
  • Muzzle Device: CBC Afterburner
  • Rail: 15” CBC M-Lok Free Float Rail
  • Upper Receiver: Forged 7075 T-6 Aluminum Upper Receiver
  • Charging Handle: 6065 Aircraft Grade Aluminum
  • Fits the AR DMPS LR/SR (Gen 1) format
  • Uppers are tested with 125 Grain Ammo

Product Details: 20″ 6.5 Stainless Creedmoor Complete Upper Assembly / 15″ M-Lok / BCG and CHH incl.

➲ 6.5 Creedmoor Barrel

Perfect for long-range target shooters and hunters, the 6.5 Creedmoor was originally designed as an across-the-course high power rifle cartridge.  While it excels at its intended role, it is a favorite among the precision rifle crowd. This barrel was designed to be built on the AR10 platform. Machined from 416-R stainless steel with a 1:8 twist rate, this barrel will deliver round after round consistently and accurately.

➲ Rifle Length Gas Tube

An essential component to your AR15 is the gas tube, which keeps your build up and running. This rifle-length gas tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.

➲ Afterburner Compensator

The CBC Afterburner compensator is a muzzle device that designed to reduce flash intensity while suppressing recoil. These linear compensators are machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It utilizes a linear design to direct the high-pressure gas behind the bullet in a straight line away from the shooter which results in a reduction of perceived noise. Due to its six-hole design surrounding the central bore, it provides effective flash suppression that preserves the shooter’s vision in low light conditions.

➲ .750 Low Profile Gas Block

The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.

➲ Standard AR-10 Charging Handle

A central component of your AR-10, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-10. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.

➲ Bolt Carrier Group

There is nothing more crucial to the performance of your AR-10 than the bolt carrier group. Manufactured to DPMS and finished with a a superior quality parkerized finish that protects against corrosion and heat, our BCG will not let you down. To ensure that it will provide superior performance in your AR-10, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Whether you’re looking for a drop-in DPMS quality replacement for your current AR, or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a premium product.

Additional information

Weight 7.8 lbs
Dimensions 30.25 × 4.5 × 4.5 in
Platform

Caliber

Barrel Material

Barrel Length

Twist Rate

Thread Pattern

Gas System Length

Rail/Handguard

Handguard Length

15"

Bolt Carrier Group & Charging Handle

Included

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.